Discounted Copper
sinks - factory direct pricing - all copper and stainless sinks are made
right here in the USA
The vast majority of our sinks are custom made. Any width, depth, or
configuration, we can likely do it.
Our
most popular copper apron front sink. This sink is made by Rachiele, right
here in Orlando, Florida. We generally have these in stock. Please visit our
comparison
page before ordering. You
will find a tremendous amount of helpful information. Rachiele copper sinks
have a lifetime transferable warranty with a guarantee that you will be
"thrilled" with the quality or we buy the sink back, pay all shipping costs
AND send you a check for $100 in consideration of your inconvenience. Our
copper apron front sinks have an exclusive right rear drain, self healing
weathered patina inside the bowl and optional patinas for the apron. We use
lead-free pure 16 gauge cold rolled copper.
Read about lead. This sink measures
30" wide, 20" front to back and 8" deep. It is designed to fit perfectly in
most 30" sink cabinets designed for apron front sinks. You may also use it in a larger cabinet.
30X20X8 Rachiele copper apron front sink
$4950$2,178.00
Helpful information...
Let me take a
moment to explain this page. First of all, the vast majority of our sinks
are made to order. This is a small sampling of what we offer.
Generally sinks on this page are at reduced prices. If you do not see
what you are looking for on this page, we likely can make it! Our custom
prices are not much higher than the prices you see on this page.
Feel free to
call or
email
us for pricing on sinks that you do not see on this page.
We make self rimming (top mount) sinks as well as under mount sinks in both
copper and stainless steel. We also make sinks to fit existing openings in
your countertop. All of our sinks are made right here in the USA. Support
our economy.
A word
about Shipping... Unless your sink is quite small, we have custom wood boxes
made specifically for your sink. The boxes, foam packing and insurance and UPS fees are all
part of the shipping costs involved in shipping your sink.
Our sinks pass the penny test!
Our naturally weathered interiors are accomplished using vinegar only! The
copper sinks will always go back to a similar patina no matter what you do
to the sink.
Don't forget to order a solid copper drain or disposal flange below! We also
have bar and lavatory drains. See the link "drains" on the menu to the far
left of the page.
Price reduction! This
is a custom under mount copper sink with a right rear drain. This sink will be
custom made for you. We will build it up to 30" wide, 19 1/2" front to back
and up to 10" deep at this price. (0ther sizes optional below) We strongly recommend an 8" deep sink
depth.
Since
this is a custom sink, just place the order online. We will call you to go
over exact measurements and will email you a drawing for your approval.
Rachiele copper under mount sink with right rear drain
$3240$1,689.00
This patented copper apron sink is specifically designed
to fit existing cabinetry. Our patented design is not necessary if you are
replacing your cabinetry or are using a specific cabinet made for an apron
sink.
Please
click on the image to get a close-up view. This is our very popular patented
design. There is a 4 to 6 week lead time right now, so order soon!
See the video
regarding installation
This is a custom sink. The dimensions shown on the photo can be
altered. Price will vary depending on size. Pricing starts at approximately
$2980, and will vary slightly depending on size and the patina/finish.
We also build this sink in stainless steel!
This sink is
specifically designed to fit existing cabinetry. This patented design is not
necessary if you are replacing your cabinetry. The STAINLESS STEEL sink slips over your
existing cabinetry. This is a CUSTOM sink, so we can work with you to size
the sink.
There is a 4 to 6 week lead time right now, so order soon!
See the video
regarding installation
Pricing will
vary depending on size. Price range starts around $2867 and does not vary
much.
Price Reduction!
I believe this is the ultimate copper apron front sink. A 36" wide sink
allows for you to have ample room on the left for setting off dishes, pots
and pans - while still having plenty of space on the right for washing or
food prep! The sink measures 36" wide, 20" front to back and 8" deep with a right rear drain.
The Ultimate Apron Front Copper Sink - 36"
$6350$2,859.00
Zero Radius, 16 gauge
Stainless Steel apron front sink. 30, 33 or 36" wide, 20" front to back and
8" deep with right rear drain location.
Since this
is a custom sink, just place the order online. We will call you to go over
exact measurements and will email you a drawing for your approval.
Stainless steel apron front sink
$2,520.00
This has to be the most gorgeous travertine sink I have ever seen. It is one
of our "gemstone" sinks, which means it is NON porous. No need to seal the
sink every year, no worries about staining! It is the perfect travertine
vessel sink! It is yours for a very low price right now! One only at this
price. CLEARANCE PRICED! This price is for ONE only. Once this one is sold,
price goes up to $1880. This is a sink we have had on display and is in NEW
condition.
Travertine Gemstone vessel sink
1880$550.00
Solid
copper disposal flange and strainer stopper. Fits Insinkerator® type units
with 3 3/8" ID as well as most Kenmore® , Maytag® , Jenn Aire® , and select
models of Whirlpool® . Will not fit Franke® , Waste King or Whirlaway®
models. Lifetime warranty
on the copper finish, 1 year on mechanical.
Our flange has a living finish, nothing to ever flake off. There is no
lacquer or plating to peel off. Our flange actively kills bacteria.
Solid copper disposal flange and stopper/strainer
$198$150.00
Our drain has a living finish, nothing to ever flake off. There is no
lacquer or plating to peel off. Our flange actively kills bacteria. Lifetime
warranty on the copper finish, 1 year on mechanical.
Solid Copper kitchen drain and strainer
$198$150.00
Solid
copper drain grid for portion of the bottom of the sink. Measures 17" front
to back and 13" wide. Will fit our apron sinks and under mount sinks. The
grid is 1 1/2" tall. This grid is designed to fit in most of our sinks.
It will fit in our standard apron front sinks and under mount sinks.
Solid copper grid for sink
$425.00
These
are photos sent in by two of our customers. they are two year old copper
"plated" drains. Copper plating will not last more than a few years in most
kitchen environments - no matter who makes the drain. (Just ask now long the
finish is under warranty) Our copper drains are never plated, just pure
copper!
This
is the perfect faucet to compliment our copper sinks. It is made in the USA
by Waterstone. It features a living copper finish - which will weather
nicely along with our sink. It also has an articulating arm which allows you
to reach the sides of the sink with ease. This is one of the few faucet
lines that we have had almost NO warranty issues with. It is a well built
product designed to last a very long time.
Specifications for the faucet
Model 4100
Shown in Weathered Copper with optional matching side spray
Long reach articulating arms
Available in 12 1/2" reach (4100-12 shown) or 18" reach (4100-18).
Towson, by Watermark - Faucet
1180$885.00
Copper Tile, 4" square. Hand hammered copper over ceramic. This is a
terrific tile for adding accent to a back splash in a kitchen. It has a
lacquered finish, so it can be scrubbed along with your other tiles in the
kitchen. (Click on the image for detail)
Hand Hammered copper tile, 4" square
$28.50
We now
have a custom cutting board available for apron front sinks. We need to know
the thickness of your countertop in order to build one. It will fit most
apron front sinks on the market. There is a drip groove around the three
sides and a scoop out so you can scrape into the drain. We have had many
requests for these, but had not found a quality supplier that would be in
keeping with the quality of our sinks until now. The cutting board measures
18" right to left. All dimensions can be altered, as these are made to
order.
Wooden Cutting Board for apron front sinks
$365.00
Check out our sister company, Luxury Home Products,
by clicking the links below...
Frattini - Wall mount tub faucets,
thermostatic showers, kitchen and bath faucets and accessories.
Stone Forest
-
Stone sinks, pedestal sinks and vessel sinks as well as copper sinks
Hand Painted Lavatory Sinks – Gorgeous hand painted sinks by the
artists who worked at LeBijou (LeBijou has since closed its doors)
Waterstone Faucets – Made in the USA, high quality faucets for
kitchen, bath and bar.
Royobath vanity systems
– Contemporary bathroom vanity systems,
including mirrors, shelving and more. Great prices!
Appliance Pulls
–
Stylish appliance pulls from 15” long to 30”
long. Crafted from bronze!
Bronze Interior door hardware
– A nice selection of high quality
door knobs and levers for interior doors.
Bronze House Numbers
– High quality heavy bronze house numbers
- Add elegance to the front of your home.
Price Reduction!
These
are photos sent in by two of our customers. they are two year old copper
"plated" drains. Copper plating will not last more than a few years in most
kitchen environments - no matter who makes the drain. (Just ask now long the
finish is under warranty) Our copper drains are never plated, just pure
copper!
