I have often mentioned that we build the finest copper sinks in the world. I must say that I can not say that about our stainless steel sinks. (You will find that I am a straight shooter - you can count on me to be factual even if it is not on our best interest. Our success has been based on this philosophy.) We do not have the ability to weld stainless with a laser. That machinery can only be afforded by a select few of the largest stainless steel manufacturers in the world. Our sinks feature zero radius corners, welded from the outside so we have a clean 90 degree seam on the inside vertical portions of the sink. The bottoms have a tight radius to form the sides. This is a minor difference, none the less I thought I would point it out.  We have so many other significant advantages.  The small quality difference is dwarfed by the Rachiele advantages.
 

Rachiele Advantages:

  • Ergonomic Design
         Our sinks feature rear corner drains. Other manufacturers use rear center or center drains which get in the way of washing pots and pans as well as food preparation.
    We recommend 8" deep sinks. The majority of stainless steel sinks on the market are too deep to be comfortable.
    We offer a lifetime limited warranty - no other company offers such a warranty.
    We offer the Millennia stainless - a stainless steel that hides water spots and scratches.
     

  • Our sinks are custom made We can fit existing situations as well as your lifestyle at prices that are similar to the mass produced sinks on the market.  We generally use 16 gauge stainless steel for our sinks.
     

  • Patented Designs
         We are the only company who can offer an apron front to fit existing cabinetry.
     

  • Custom Drain Board Options
         We offer custom drain boards on our undermount and apron sinks - you pick the size!
     

  • Integral Sinks
    We can build a sink into a stainless steel countertop so you will have no visible seams between the sink and the top.
     

  • Options
    We can put a towel bar on your apron front sink
    We can arrange for custom wood cutting boards for your sinks
     

1
The sink above is our patented comfort sink shown as a single bowl. It features one of our exclusive artistic finishes that we call  Drifting Spirit. We commissioned a local artist to apply this beautiful permanent finish to the apron of this sink.

This is a one of a kind sink that we have kept for sentimental reasons. It is not for sale - however, the old saying; "everything is for sale at a price" applies.

I have to admit, it is a sexy design, but it is not as practical as a standard apron sink.

2








$2520
 Purchase this sink
 This stainless sink is on sale right now. Take advantage of end of year pricing!

 

 


The above sink is designed to fit existing cabinetry. The apron is shorter and there is a channel behind the apron that slips over the face frame. We own the patent on this design.

Sinks that make sense start with a large bowl. Double bowl sinks, for the most part, are obsolete. Center drains are obsolete as well. We recommend a rear right or rear left drain so you can place a roll-out trash mechanism below the sink (where most of the trash is generated.)

Remember, these are not mass produced sinks. Think of the price difference between a mass produced dress and a custom made dress. Our prices are right in line with the mass produced products, only they are made in the USA, backed by the best warranty in the industry!

CHECK OUT OUR PRICING!!!!
 3

Our single bowl custom undermount sink (above) up to 30" wide is only $1422 - featuring zero radius corners, 16 gauge construction,  and right rear drains. Our price is lower than mass produced zero radius sinks!


 This is a Blanco 18 gauge (thinner) zero radius sink with a rear center drain (a horrible location for a drain) Their retail price is $1425.  (for a vastly inferior mass produced sink)

Looking for a drain board sink? We have them. You can have one made with ribs as shown, or with a smooth tapered look.
 4
 

5


This is our patented comfort sink. The sink literally wraps around you for comfort. We prefer the sink in a single bowl configuration, however, will build whatever you like! Everything we build is custom to fit the user. (left)

6
 Stainless Apron Sink totally hammered
Hammered undermount with radius for faucet. 9

This is one of our many patented sink designs. It features a partially offset drain which will allow you to place a large cookie sheet in the sink and still have access to the drain. The drain can be rear center, right rear or left rear for your convenience. (below)
10



7
Custom Stainless steel sink with curved front to match curve of sink cabinetry.

11
Hammered stainless apron sink

This is the solution to a corner sink cabinet!
 8
See a custom angle double bowl sink that was made perfectly to fit the angle of the cabinetry. This was all done over the phone and by email.
12


13
We are often asked if we can hammer stainless. We can, and this is a photo of a hammered apron on a stainless sink.

14

Custom lavatory sink designed to be integrated into a stainless steel countertop by owner.
 

15
 Yes, we build double bowl sinks and even triple bowl sinks. Please let us tell you about all of the tremendous advantages of single bowl sinks.

Looking for a good solution for a corner sink? Feast your eyes on this one. The old fashioned designs for a corner are nothing but useless and difficult to work in. We believe our solution offers a great way to work in a corner kitchen design. (above)

16



Do you have a special need? This sink was designed for a yacht. (left) We can craft special sinks for aircraft as well. Most any shape and design is possible. Just ask.

We will send you detailed drawings of the proposed sink for your approval.

We frequently receive requests to fit an existing cutout in a granite top. Please ask us to help!

17

Undermount double bowl features rear center drains. Who thought up the idea for a center drain? There is no need for a drain dead center of your sink. At least move them to the rear so you have some work space.  

Looking for a bar sink, we can make them! How about a hi-tech stainless vanity sink?

                18



19
 Our textured "Millennia" stainless steel is the way of the future. It hides scratches and water spots. If you are considering stainless steel, this is the way to go!  The Millennia textured stainless steel apron sink is the king of sinks. It not only looks good the day you get it, but it will continue to look good!

 

20
Stainless steel apron front sink with towel bar. The towel bar was made using the handle from a refrigerator.

 

21
We mean custom when we say custom. This sink was a special request by one of our dealers.


 23
Undermount Millennia single bowl sink - photo sent in by customer.

22

Custom Millennia textured stainless steel sink with a deck for a faucet built into the sink.

 24
Millennia textured stainless apron front sink.
25  


 We now offer fitted cutting boards for our undermount sinks. They are available in maple, cherry, or walnut. The woods can be mixed too, as shown in the photo on the left. The pictured cutting board is a mixture of maple and walnut. We are having these made by Dutch Mills Cabinetry of Goshen, Indiana - one of the finest cabinet makers in the industry.

This photo features our Millennia Textured stainless steel sink.

This under mount stainless steel sink features a drain board with an extra deep drop on the left side.  26

27
 This mammoth of a single bowl sink is getting an inspection by our official "sink inspector". All kidding aside, all of our sinks are thoroughly inspected before they leave our facility. You can be assured our sinks will drain properly and will be true and square.

 

Custom corner Millennia Stainless Steel Undermount Sink  (Installed below) This sink was made to fit an existing cut out.

28

Got the sink on Friday…Wow looks great.  Got it home and WOW IT LOOKS BIG!!! Anyway, I realized it is difficult to put an under counter sink into an existing corner!!! Wow again!!! We ended up taking out one of the sidewalls and got it in the cabinet.  There was about 1/4" left on both sides…ie: PERFECT FIT.   M. Ness

Apron front sink with two drainboards. 29

 

Single bowl comfort wave patented design.
30

counter for wordpress