Copper sinks with drain boards
Copper sinks with drain boards are a bit pricey. Depending on the size and whether the drainboard has ribs, you can roughly figure an additional $800 or so for each drainboard side. I can build these in stainless as well. The stainless option will be significantly more than the copper due to the fact that stainless is much more difficult to work with.
In my humble opinion my Signature Series sink, that offers interior ledges to hold cutting boards and a grid, might be a better option for some of you.
These sinks are custom made. Generally, the bowl is about 28" long and the drain board is about 18" long. That being said, your wish is our command!
Certainly one of the largest sinks we have built. This sink measured 7 1/2 feet long! It featured two drain boards and an apron front with a custom horizontal patina. We shipped this one to Hawaii. This sink was designed to be under mounted. We have shipped quite a few sinks to Hawaii and Alaska.
Copper sink with drain board right as well as a right rear drain. This sink will be top mounted and has a slightly raised architectural deck for top mounting (Self Rimming) Built Nov. 2016 If you look closely on the outside left of the sink you will see signatures of all who worked on the sink. Ray, Rey, Tony and Roy.
One of our dear customers sent this photo of their copper under mount sink with integrated drain board. We offer a ribbed and a flat style. Both have a generous slope into the sink.