Custom Retrofit Stainless Steel Workstation Farm Sinks with short apron and a channel behind the apron to slip over existing cabinetry. Patented design.

Below, select the general sink size you need and begin building your custom sink. Please call to order your sink. I will walk you through the process, explain different designs and options so you can make an informed decision. I will ask questions about your height, handedness and food preparation style as well as other pertinent information. We will decide together which accessories might be most helpful and which ones might be ordered later, after you use your sink for a while. My goal is to provide a custom sink that will be as efficient as possible for your particular lifestyle and as ergonomically comfortable as well - doing my best to ensure your investment is a wise one. Schedule a personal phone discussion to design your sink here. (Use the tool below to estimate your investment)
Custom Retrofit Stainless Farmhouse sink
with Patented Channel Behind Apron
Starting at: $3,250.00
Apron Height Notes :
Sink Length:
Stainless Type:
Hand Hammering:
18 inch width -to fit half sheet pans ( Add $100.00 )
Top Mount Option
keeping existing counter:
Workstation choice:
Essentials Pack -checked ( Add $645.00 )
Stainless drain
or flange system
Crating and Shipping:
Retrofit hammered stainless steel kitchen farmhouse apron front sinkThis was a fun project. The old sink slipped out and ours slipped right in.
Schedule a personal phone discussion to design your sink.

Do you have cracks in your granite in front of your kitchen sink?
I have a solution for you. Click here for my solution.

You may also replace your existing under mount or drop in sink with a farmhouse stainless steel sink without having to cut your cabinetry! Do it with ease with my patented design and my personal assistance.

If you are looking for a farmhouse sink and you are replacing your countertops and keeping your cabinetry, We have the answer.

My patented design offers an apron that is shorter than the bowl with a channel behind the apron allowing for the apron to slip over the cabinet frame simply by removing the false drawer head(s).

I can design one of these as a drop in or under mount sink. The drop in version (seen below) and the undermount version seen to the left are the perfect solution for cracked granite in front of or behind your kitchen sink. The photo to the left is an under mount version used generally when replacing a countertop and keeping existing cabinets. Cracks in granite are common due to the frequent use of iron supports that have been routed in to the granite in front of and behind the sink to add strength to a weak area. Granite is porous, so over time the moisture goes through to the iron and rust begins. When iron rusts, it expands. Since the granite cannot expand, it cracks. This problem is nation wide and there are only two solutions that I am aware of. Replace the granite or use my patented sink design that fixes the issue and offers a far superior workstation sink that allows for food preparation on the sink instead of on the counter!
retrofit farm sink with shorter apron to fit existing cabinetsRetrofit undermount, commonly purchased when countertops are going to be replaced and cabinetry is not.
retrofit farm sinkBefore and After. We were tasked with replacing an oversized double bowl sink with a farmhouse stainless workstation sink (hand hammered). My background as a kitchen designer came in handy when calculating the perfect fit for the countertop and for the cabinet below. No cutting of the cabinet was required.
NexGen™ workstation sink with rear deck and integral backsplash. Drain grid and butcher grade white cutting board.
NEW DESIGN FEATURE FOR 2018 NexGen is the next generation in workstation sinks. Up until now, workstation sinks had a "step" that held up the accessories. My new innovative design removes the step and replaces it with a small ledge. The sink width remains the same at the bottom as the top. This innovation gives the user an extra inch of front to back space in the sink with this option. My design gives 34 square inches of additional space inside a 36" sink. You just might fit your outdoor grill inside the sink! Our original Signature Series has a 1/2" step - much like many others on the market that have followed my original design. Call me to explain in more detail. 407-880-6903
Prior to manufacturing sinks, I was an accredited kitchen designer. I came up with this design idea about 22 years ago to solve a problem. Many families were upgrading their kitchens by replacing countertops and appliances, but were keeping their cabinetry. Many wished they could have an apron front farmhouse style sink. My design, with a one inch channel behind a shorter apron solved the problem. I patented the design. Everything about this design is custom to your particular situation. The apron height will be basically the same height as the false drawer on your sink cabinet. The sink can be much deeper, as it falls behind the face frame of the cabinet. Take a look at this videos further down the page below the pricing to see how simple this design makes an installation so easy. I can build this type of sink as an under mount or drop in top mount sink.

This video shows my patented retrofit stainless apron farmhouse sink.

Always best to send me a photo of your current situation via Email too!

This video shows the installation as an under mount sink
Two installation options. You can install as shown and shim the counter top slightly (most are shimmed anyway), or you can rout or belt sand down the area where the sink sits.