The easiest way to get specifications on all   Rachiele sinks I hope you will consider joining our family of custom sink owners. I look forward to working with you.

Rachiele Sink Specifications and Cabinetry Planning Guides

All designs on this page are Trademark designs specifically designed by Dino Rachiele and should not be coppied without permission.

Note: I have made minor changes to the specifications of our workstation sinks. If you require accurate specifications, please email a request. The specifications below are accurate enough for 99% of the planning needed for cabinet installation. The upgraded specifications do not affect the installation planning.

PLEASE NOTE: OUR SINKS SHOULD NEVER BE INSTALLED SITTING ON A SHELF OR SUPPORTED BY A SHELF BELOW THE SINK. THE SINK SHOULD ONLY BE SUPPORTED BY THE FLANGES AND THERE SHOULD BE ROOM FOR AIR MOVEMENT BELOW THE SINK.

Our most common sizes of kitchen, bar and prep sinks are listed below. Keep in mind, we are a custom manufacturer. All specifications on this page are for right rear drains. If you are left handed, we can build you a custom left drain sink. If your sink is not listed on this page, we will be drawing up (and emailing) a custom set of specifications after you place your order. NOTE: Drawings are not to scale and many refer to copper - however specifications are identical in stainless sinks. Sadly, some details on these drawings are intentionally not accurate, due to the fact that my specifications are constantly copied by competitors (and yes, they copied the intentional flaws LOL). You will receive accurate specifications when you order. Keep in mind, the bottoms of our sinks are sloped to the drain. Portions of the sink will be lower than the specified dimensions.

NOTICE 2018: Most of our insignificant specifications have changed due to improvements in design. The specifications on this page are not current, however they are quite sufficient for cabinet planning. You will receive current drawings when you order your sink. Our sinks are not limited to the sizes you see below. We have built sinks longer than 96" and in shapes that are quite unusual. We are up to any challenge.



Prep and Bar Sink Specifications

Corner Sink Specifications